Bug Hotel

Bug Hotel

This simple, yet sturdy, insect observatory lets young entomologists check in guests, then check 'em out.

Materials

• Oatmeal container
• Markers
• Poster paints and brushes

• Utility knife
• Screen

Instructions

1. Use markers or poster paint to decorate the outside of the oatmeal container, making sure you post the house rules!
2. Paint or draw the shutters, then use a craft knife (adults only) to cut them out with sideways H shapes.
3. Paint the door, then cut it out, making sure its bottom edge is at least 1/4 inch above the floor inside (to keep guests from checking out too early).
4. Roll the screening so it rests snugly around the inside of the container. Trim so the top edge fits beneath the lid and leave a 1-inch overlap where the side edges meet.

Tips:

Be sure to provide guests with food (notice what they were eating when you found them) and water (a filled plastic bottle cap should meet their needs).

Mother's Day Flower Pot Craft

Mother's Day Flower Pot Craft

This fun craft is a great Mother's Day gift for Mom! She is sure to love this personalized flower pot with her favorite family pictures in it. Pick your favorite pictures for some of the flowers and write your own special message on the other flowers.


Supplies
3" Clay Pot
Clay
Colored Popsicle Sticks
Flower Template (click here)
Construction Paper (many colors)
Scissors
Glue
Scotch Tape
Pictures
Paint, Markers, Crayons, etc.


Click here for printables, patterns and Templates

InstructionsDecorate your clay pot however you would like! Put it aside to dry.

Print out the flower template provided above.

Cut out the template flowers, trace them onto construction paper and cut out the construction paper flowers.

Cut the center circle out of the template flower. Place onto construction paper flowers and trace around it. Carefully cut out the center circle in each of the construction paper flowers.

Tape pictures or sayings on the back of each flower so that they are visible through the hole.

Tape a popsicle stick to the bottom of each flower as the stem.

Cut leaves out of green construction paper and glue to each popsicle stick.

Fill the clay pot with clay. Stick the popsicle sticks into the clay to complete the craft!

This craft is reprinted courtesy of  freekidscrafts.com and AllKidsNetwork.com.

Spring Lacing Projects from DLTK-kids

Spring Lacing Projects Lacing projects are a great craft for preschoolers and kindergarten children to complete during any holiday. The lacing gives them fine motor skill practice and practice tying knots and bows (shoelaces!) The large blank area in the center gives the kids the chance to 'get creative' by further decorating with paper cutouts, stickers or crayons.

There are a few different templates to choose from.

Materials:

• Wool or ribbon
• single hole punch
• scissors
• pencil
• card stock, poster board or construction paper

Directions:

• ADULT: print template of choice or make your own.
  
• ADULT: Trace onto a thick piece of cardboard (cardboard backs from paper pads or old boxes work well).
  
• ADULT: Cut out this template
  
• Allow the children to trace the template onto a piece of card stock or poster board (or construction paper... though I prefer the thicker card stock for lacing projects).
  OR have an adult do this prior to craft time.
  
• Allow the children to cut out their card stock shapes
  OR have an adult do this prior to craft time.
  
• Allow the children to make holes around their shape (about an inch or two apart)
  OR have an adult do this prior to craft time.
  
• Provide the children with a length of wool or ribbon.
  • You can wrap some scotch tape around the end of the wool to make it more like a shoe lace.
  • Have the child thread the wool through the holes.
  • children can use different 'stitches' to complete their lacing project (simple running stitch, X stitch, blanket stitch, etc). If you want to 'inspire' the kids, provide a number of examples for them and have them up at the front of the room.
    
• Practice tying knots and/or bows to connect additional pieces of wool or to tie off at the end of the lacing.
  
• Let the children use stickers, stamps, die cuts, or markers and their imagination to decorate their completed project.
  
• ALTERNATIVE: instead of lacing just one shape, lace together two shapes. Leave the top open and you'll be able to stick things inside when you're done!
  

• Close the template window after printing to return to this screen.
  
• Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).

Specific Instructions PLUS Templates:

Cloud: lace with a running stitch or a blanket stitch around the edge of the cloud - silver or grey is a good color (every cloud has a silver lining), but white or blue would work nicely too. You can tie a bow anywhere on the cloud and draw a face on the cloud if you like. Cloud Template
Flower: lace with a running stitch in a circle around the center of the flower. Tie a bow at the bottom. Green wool or ribbon would be nice. You can color the outside of the flower and draw a face in the middle if you like. You could also lace around the outside of the flower instead of or as well as the center, using any color you like (red, blue, pink, purple, etc). A blanket stitch would be nice for this.. Flower Template
Rainbow: lace with a running stitch in a different color along each arch of the rainbow. Rainbow Template
Raindrop: lace with a running stitch around the raindrop. Tie a bow at the bottom or top. Blue wool or ribbon would be nice. Raindrop Template	Crafts found at www.dltk-kids.com

Fairy Toilet Paper Roll Craft

Harpy or Evil Fairy Toilet Paper Roll Craft This is a fun and simple color, cut and paste paper craft that uses a toilet paper roll as a base to give it a three dimensional effect. You can use this craft as a harpy (from Greek Mythology) or as an evil fairy (from stories like Sleeping Beauty). In Greek mythology, the harpies were winged death spirits who stole food from Phineas the prophet.

Materials:

• a tp roll,
• printer,
• glue,
• scissors,
• something to colour with
• a piece of paper

Instructions:

• Print out the template of choice.
  
• Colour the pieces as appropriate and cut them out.
  
• Glue the large rectangular piece around the toilet paper roll
  
• Glue the arms to the sides of the toilet paper roll.
  
• Fold the tabs on the feet and glue them inside the toilet paper roll to give it a three dimensional effect.
  
• Glue the head onto the top of the toilet paper roll.
  
• Glue the wings onto the back of the toilet paper roll
  

• Close the template window after printing to return to this screen.
  
• Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).
  

Template 1: (color) or (B&W)

Template 2 - wings: (color) or (B&W)

Nurse Toilet Paper Roll Craft

Nurse TP Roll Craft This is a simple cut and paste craft that uses a toilet paper roll as a base to give the finished craft a three dimensional effect. Materials: toilet paper tube, a printer, a piece of paper, some crayons, scissors, glue

Instructions

• Print out the template of choice.
  
• Colour the pieces as appropriate and cut them out.
  
• Glue the large rectangular piece around the toilet paper tube.
  
• Glue on the thin rectangle at about the center as a belt.
  
• Glue on the arms and the head.
  
• Glue the feet onto the bottom of the tp roll, bending the tabs to make a 3D effect.
  
• Glue the baby into the hands (OPTIONAL)

• Close the template window after printing to return to this screen.
  
• Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).
  

Template (color) or (B&W)

Craft found at www.dltk-kids.com

FireMan/FireGirl Craft out of Toilet Paper Roll

FIREMAN CRAFT "Jackie" asked if I had a fireman toilet paper roll craft, so I put this one together. It's a bit more like a "firechild" than a fireman, but I thought it might appeal. The face is made so that it could pass for a boy or a girl depending on who the junior fire fighter/crafter is. Materials: something to colour with if using the B&W version, scissors, glue, paper printer

Instructions:

• Print out the template of choice.
  
• Colour (where appropriate) and cut out the template pieces.
  
• Glue the large rectangular piece on first to cover the tube.
  
• Glue on the head, arms, and boots.
  
• "Decorate" as a fireman with hat, belt and fire hose.
  

Templates:

• Close the template window after printing to return to this screen.
  
• Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).
  

Template (color) or (B&W)

Craft found at www.dltk-kids.com

How to Make Moss Graffiti

Moss Graffiti



Moss graffiti, also called eco-graffiti or green graffiti, replaces spray paint, paint-markers or other such toxic chemicals and paints with a paintbrush and a moss "paint" that can grow on its own. As people become more eco-friendly and environmentally aware, the idea of making living, breathing graffiti has become a more green and creative outlet for graffiti artists

 Ingredients

• One or two clumps (about a small handful) of moss
• 2 cups of buttermilk
  •  You can also substitute with yogurt (vegan yogurt can be used)
• 2 cups of water (or beer)
• 1/2 tsp. sugar
• Corn syrup (optional)

 Steps

1. Gather up as much moss as you can find or buy.
2. Wash the moss to get as much soil out of the roots as possible.
3. 
   

   Break the moss apart into manageable pieces and place in blender.
   Break the moss apart into manageable pieces and place in blender.
4. 
   

   Add the buttermilk/yogurt, water/beer and sugar.
   Add the buttermilk/yogurt, water/beer and sugar. Blend the mixture until completely smooth. You'll want it to have a paint-like texture.
   
   
   • 
     

     If the mixture is at a consistency where you feel it will drip, add corn syrup until the consistency you desire is reached.
     If the mixture is at a consistency where you feel it will drip, add corn syrup until the consistency you desire is reached.
5. Use a paintbrush to apply the moss-paint to the surface on which you wish your design to grow.
6. 
   

   If possible, check back weekly to either spray the design with water (to encourage moss growth, especially if you live in a dry environment) or apply more moss-paint

Things You'll Need

• A paint brush
• A blender

Tips

• 
  
  Moss can also be used as a decorative element indoors.
• Apply your paint in a moist area that receives a moderate amount of sunlight.
• Moss grows best on porous surfaces such as bricks or other stones.
• The best times to plant your graffiti are in the spring or fall, and keeping the moss moist will encourage its growth.
• If for any reason you wish to get rid of the design or parts of the design, spray it with lime juice as this will kill the moss.

Warnings

• Graffiti art, unless done with a public art permit, is probably not legal in your area. This article does not endorse illegal art, but does suggest that the graffiti can be done in or around your home or with a permit.
• If you're doing this because it's the green thing to do, be careful of how you obtain your moss. Please do NOT gather it from public areas. You can buy it from nurseries or online sources who grow it commercially. Not exactly anti-establishment but the right thing to do.